The Casspir is a landmine-protected personnel carrier (APC) that has been in use for over 20 years. It is a four wheeled armoured vehicle, used for transport of troops. It can hold a crew of two, plus 12 additional soldiers and associated gear. The Casspir was unique in design when launched, providing for passive mine defence. The main body of the vehicle is V-shaped and raised above the ground, so that if a mine is detonated, the explosion is less likely to damage the crew compartment and kill the occupants. The cross-section of the hull is V-shaped, directing the force of the explosion outwards, further protecting the occupants. The vehicle is also armoured for added mine safety, as well as protection from small arms fire. The Casspir was the inspiration and prototype for the US Marines MRAP project.

Dimensions

Length: 6 900mm
Height: 3 125mm
Width: 2 450mm

Ground Clearance: 350mm

GVM: 10 880 kg
Payload: 1 400 kg

Engine Specs

Engine Type: ADE352 Non-turbo and Turbo direct injection
Cylinder: 6 Cylinder
Transmission: 5-speed Synchromesh DB G
Horse Power: 124 kW ( 165 HP ) @ 2800 rpm
Torque: 520 Nm @ 1600 r/pm
Fuel Type: Diesel

Protection Level

Ballistic: B6 (7,62 X 51mm NATO Ball.)
Mine: 3 x TM57 Blast mine (21kg TNT) under any wheel and 2 x TM57 (14kg) under the hull.

Building on the original sound design concepts that were core to it dominating the APC market, PANZER Technologies has modernised the MAMBA to embrace emerging threat protection, improved performance and increased its role in modern Peace Keeping initiatives and War Theatres. Panzer Technologies has retained the MAMBA’s structural design advantages that have been the inspiration for a plethora of subsequent vehicle designs.

The Magirus Iveco, or optional Mercedes Benz drive trains, are both highly compatible with most existing vehicle fleets. Reducing spares inventory, technical and operator training, reduces costs and increases speed to deployment.

• The increased engine capacity and output provides similar power to the Casspir in a lighter more nimble vehicle, improving performance in urban theatres, particularly:
• Tighter Turning Circles
• Better Acceleration
• Greater Payload for Up-Armoring and Weapon Systems over its Troop Compliment
• Adherence to tried and tested European components, increasing reliability and reducing downtime in African Theatres over American component based vehicles.
• Up to 8 roof hatch firing points
• Flexible configuration as APC, Ambulance, AFV, C2 or communications vehicle

Dimensions

Length: 5 140 mm
Height: 2 650 mm
Width: 2 450 mm

Ground Clearance: 350 mm

Engine Specs

Model: Magirus / Iveco | Deutz BF6L9I3F Turbo
Cylinder: 6 Cylinder in-line Air Cooled
Piston Displacement: 6 700cc
Power: 127kW (172HP) @ 2800rpm
Torque: 51.8mkh @ 1600rpm
Power to Weight Ratio: 17.86kW per ton
Fuel: Diesel
Coolant: Air Cooled

Protection Level

B7, Capable of Stopping 7.62 x 54R AP
2 x TM-57 (14 kg of TNT) Under Hull
2 x TM-57 (21 kg of TNT) Under Wheel
Armored Spare Wheel
Armored Side Bins for IED Protection
Armored Fuel Tank

Sterling Cross Defense Systems, a Canadian Company, is proud to announce its new partnership with International Cartridge Corporation as Exclusive Distributor in Canada.

International Cartridge Corporation is the first major manufacturer to dedicate its facility to lead-free and non-toxic frangible ammunition. At International Cartridge Corporation we believe this raises the bar for the future of lead-free frangible ammunition.

Conventional ammunition has a significant hazard associated with close range fire, ricochet and over penetration. The International Cartridge Corporation’s round has controlled fragmentation characteristics while maintaining lethal penetrating capabilities. This unique performance reduces hazard for the shooter without compromising firepower.

Videos

Ideal For

Calibres Available

Variants Available

Estimated annual production is 4-6million rounds per caliber and can be manufactured in mass quantities in minimal time frames.

*NATO SINTOX Primers
**Quantities of 20,000-100,000 Rounds Per Calibre Available for Delivery Within 8-10 weeks
***FULLY NATIONAL RESOURCES CANADA (NRC) APPROVED

The Draganflyer X6 is a remotely operated, unmanned, miniature helicopter designed to carry wireless video cameras and still cameras. Operate the Draganflyer X6 helicopter with the easy to use handheld controller while viewing what the helicopter sees through video glasses. The Draganflyer X6 helicopter uses a unique 6-rotor design refined from an original concept that has been under development since early 2006.

Expandable

The Draganflyer X6 helicopter accepts multiple interchangeable video camera and still camera modules.

Choose the camera that is best for you:

• 10.1 MP digital still camera with 720p video recording
• 1080p HD video camera
• Low light video camera
• Thermal imaging video camera
• Micro color video camera

Increased Thrust

The Draganflyer X6 helicopter utilizes an innovative six-rotor design. The six rotors are arranged as three counter-rotating offset pairs mounted at the ends of the three arms, with matched sets of counter-rotating rotor blades. Differential thrust from these three equally spaced points make the Draganflyer X6 helicopter able to maneuver quickly and precisely. The offset layout increases the thrust without increasing the size of the footprint, and naturally eliminates loss of efficiency due to torque compensation.

Quiet & Efficient

Not only does the unique design maximize thrust, it also minimizes sound output. Because the rotor blades are designed for maximum efficiency, they naturally produce less turbulence when spinning. And because the motors direct drive the rotors, no noisy gearing is required. At hover the Draganflyer X6 produces less than (approx.) 65dB of sound at one meter (3 feet), and less than (approx.) 60dB at three meters (9 feet).

Functions In Small Areas

The Draganflyer X6 is small enough to fly indoors where other full-size helicopters or airplanes can’t, yet is large enough to fly outdoors.

Video

After 31 years since the first CASSPIR landmine protected personnel carrier was introduced, we are proud to announce the availability of the SCDS CASSPIR MK IV. With a more powerful drive train and a stronger hull offering improved protection, the CASSPIR MK IV offers a high level of protection along with a slightly wider and lower cabin, offering improved interior design.

Videos

Dimensions

Length: 6500mm
Height: 2730mm
Width: 1774mm

Wheel Base: 3900mm
Ground Clearance: 400mm

Engine Specs

Model: Cummins 6.7 lt
Cylinder: 6 Cylinder in-line Water Cooled, Turbo Intercool
Valves: 2 Valves per Cylinder
Transmission: Manual / Automatic
Horse Power: 205kW 310 100 NM
Fuel: Diesel / 2000km Range

Protection Level

87+
Stagnag Level 4+

Sterling Cross, a complete solutions provider representing key manufacturers globally whose products accentuate each other for the security, law enforcement and military markets. Sterling Cross provides far reaching networks and technical expertise. Providing our clients with global business strategies with a calculated level of service to penetrate crucial market sectors.

Sterling Cross Defense Systems Corp and SCDS-Schmeisser GmbH of Germany has agreed to partner together for the Manufacture and Sale of the Schmeisser M4, Schmeisser M16 and the Schmeisser Designated Marksman Rifle (DMR) in Canada and also to other countries that Sterling Cross Defense Corp has strong links and connections with.

Hard earned expert knowledge and ongoing success in this field resulted in the foundation of the Schmeisser GmbH. The company Schmeisser GmbH proudly carries the name of Hugo Schmeisser, doubtless one of the most innovative arms designer of the 20th century. This is the tradition, carried forward into the 21st century by the new Schmeisser Company.

Schmeisser weaponary conforms to the latest NATO mil specs, delivering a 100% parts compatibility with already fielded arms M-16 and M-4.

Aluminum parts are drop forged from T7075T6, Steel parts are hammer forged from Thyssen Krupp Steel prior to being machined on state of the art CNC equipment.

Our thoroughly Teutonic approach to compromise free total precision manufacturing guarantees best accuracy, a long service life and a most reliable function when it counts the most. A gun to stake your life and mission on!

Our pistols combines modern production methods with the rugged reliability of the timeless pistol design by the legendary John M. Browning, originator of the classic combat pistol of all time. As distinguished in peace time as they were in war, our 1911 pistols are the top choice of police, military and competition shooters around the world — a distinction of the perfectly designed handgun.

Caliber : .45 ACP Mag. Capacity : 6 rounds Barrel : Bull Barrel Length : 89 mm (3.5″) Overall Length : 186 mm (7.32″) Weight, empty : 0.98 kgs. (2.16 lbs.)		Caliber : .45 ACP Mag. Capacity : 8 rounds Barrel : Standard Barrel Length : 127 mm (5″) Overall Length : 222 mm (8.74″) Weight, empty : 1.12 kgs. (2.47 lbs.) - Also available in 9mm , .38 Super, and 40 S&W, 9-round magazine , ramped bull barrel for .40 S&W.
Caliber : .45 ACP Mag. Capacity : 13 rounds Barrel : Standard Barrel Length : 127 mm (5″) Overall Length : 222 mm (8.74″) Weight, empty : 1.18 kgs. (2.6 lbs.) - Also available in 9mm , .38 Super, and 40 S&W, 17-round mag. for 9mm and .38s, 15-round mag and ramped bull barrel for .40S&W.		Caliber : .45 ACP Mag. Capacity : 8 rounds Barrel : Standard Barrel Length : 127 mm (5″) Overall Length : 222 mm (8.74″) Weight, empty : 1.12 kgs. (2.47 lbs.) - Also available in 9mm , .38 Super, and 40 S&W, 9-round magazine , ramped bull barrel for .40 S&W.

The HSG-1 has a self-loading system and is locked by a movable part supported closure. The Triflon coated housing is additionally fixed by stabilizing bars on the right and left. This stabilisation rails are mounted in a complex laser welding process to the greatest possible freedom from distortion over the entire length of the rails. The superior accuracy is achieved by hardened runs from German production. The lens is mounted with a rail “Picatinny profile” in a laser welding process and is directly mounted on the housing. The length of the stent was chosen so that the heaviest lenses could be mounted easily. The seawater-resistant Triflon housing is oil and acid resistant, has a 8000 abrasion resistance with sliding and running properties. .308 Win caliber, barrel length 630mm, 305/1/12 twist, overall length 1185 mm, weight 5.7 Kg

Sterling Cross Defense has a vast experience in the Shotgun and Shotgun ammunition market. Sterling Cross has a complete range of shotguns to meet various needs and requirements of Military, Law Enforcement and Sports shooter.

SCDS Molot 12 Gauge

The main problem with Military and Law Enforcement pump action shotgun’s is the time and effectiveness of breaching a door. This is where the SCDS Molot 12 Gauge comes into its own. With a semi-automatic system, 8-10 round magazine and a special magazine funnel which allows for faster reloading, what more could a specialist breacher want from a shotgun.

SCDS Pump Action Shotguns

Three-inch chamber; Pump action; Interchangeable choke (improved cyl., modified or full choke) for D/IC model; Bead front sight; Serration on receiver; 6.0-9.0 lbs. trigger pull; 13 1/2-13 3/4 in. length of pull; Parkerized finish; Contoured barrel; Damascened bolt; Cross-bolt safety; Polymer buttstock & forearm (pistol grip for BG & FS models) except wooden stocks for DI/C model.